Any 500 Rack.
Your 100 Series.
The adapter runs Rodec 100 series modules in any 500 series housing. It takes one stereo slot and holds up to 22HP: an M-108, M-102 and M-104, or an M-108 with a SideStepper or MiniStyler.
Balanced outside. Unbalanced inside.
From balanced to unbalanced, and back
A 500 series rack works with balanced audio, 100 series modules work unbalanced. The adapter de-balances the signal from the rack, sends it through your modules and balances it again on the way out. It also converts the rack's power for the modules, so they need nothing else.
Modules in series
Inside, the modules are linked one after the other with ribbon cables, just like in the Rodec ONE: from the adapter to the first module, through each module, and back from the last. Fill the 22HP the way you like: 6 + 6 + 10HP, or 6 + 16HP.
Sidechain, MIDI and CV, in any rack
A 500 series rack only carries audio and power. The Breakout Module adds the rest: a single-width 500 series module with CV 1, CV 2, sidechain and MIDI for two adapters. That is what the SideStepper needs for sidechain and MIDI sync, and the M-104 and MiniStyler for CV. It requires the adapter MKII. In the MX Modular you don't need it: the console gives its slots sidechain, MIDI and one CV from its backpanel.
Technical specifications
- Format
- 500 series, one stereo slot (two positions)
- Holds
- Up to 22HP of Rodec 100 series modules
- Audio
- Balanced to the rack, unbalanced to the modules
- Power
- From the 500 series rack
- Chain
- Modules in series on ribbon cables
- Modules
- M-101, M-102, M-104, M-108, MiniStyler, SideStepper
- Racks
- Any 500 series rack, and the MX Modular
- Breakout
- Optional, for sidechain, MIDI and CV in third-party racks (MKII)